Articles

The second generation of combines of the TR76-TR96 series took root into production in 1985. Unlike predecessors these machines were equipped with powerful engines of the Caterpillar brand. These engines had a turbo-supercharging and owned capacity of...

In 1999 the last series of TR combines was provided ​​. These machines were equipped with self-produced engines which differed high profitability of fuel and a good inventory of a torque. The vertical monitor which is on the right removes...

In the summer of 2002 a series of CS 520- CS 660  combines is provided. In these combines the unique system of maintenance of the set height of a harvester cut , and also the monitoring system of pressure of a harvester is applied. The unloading...

Combines CX 720 - CX 880 are leading models of New Holland combines with the classical scheme of the thresh which turns on an inertial thredhing drum diameter 750 mm. The big surface of a concave provides the main part of process of sorting. The...

In 2002 a series of combine harvesters of CR 960 - CR 980 was implemented. By these machines two rotors 264 cm long and with a diameter of 56 cm were established. Thanks to a reducer the number of turnovers can be regulated from 276 to 698 rpm. The...

The TC5080 combines in comparison with the competitors had higher effective performance. The threshing device in these machines separates to 92% of grain straw and the rotor separator still in addition separates from 3-4% of grain. The threshing...

The basis of combines of the CS6050- CS6080 series is constituted by a high-inertial drum with a diameter of 60 cm with a strong concave. It provides harmonious process of the thresh and separation. The rotating rotor separator with a concave increases...

The thresing and separating design of CSX7040- CSX7080 combines series  is based on four-drum technology. Big diameter of a drum and the extended concave provide high-quality process of the thresh and separation. The Multi-Thrash system allows to...

Performance improvement of combines when preserving their dimensions became result of upgrade of a series CX. Big diameter of a  drum in 75 cm and a rotor separator in 72 cm provide outstanding performance of the thresh of grain. Thus performance of...

CR 9060 and CR 9080 combines are equipped with two powerful longitudinal rotors for the thresh and grain sifting. On CR 9060 the rotor with a diameter of 43 cm, and on CR 9080 - with a diameter of 56 cm is provided. The high speed of cleaning is...

The 300 Series John Deere engines was presented for agricultural customers in 1960 year. It was the first in-line 3-, 4- and 6-cylinder gasoline, LP gas and diesel engines. The engines provided John Deere “new generation of power” tractors with an...

The 300 Series John Deere engines was presented for agricultural customers in 1960 year. It was the first in-line 3-, 4- and 6-cylinder gasoline, LP gas and diesel engines. The engines provided John Deere “new generation of power” tractors with an...