Output shaft engine with flange - 545621 Claas
Spare part of the Claas combine engine.
For the transfer of the rotary motion from the engine to the unit, combine units through the overload clutch.
Used to replace worn or damaged parts during repair and restoration work.
Steel detail of a complex spatial shape in the form of a shaft with a flange in the assembly. For fastening of a disk of a coupling on a flange of a shaft the threaded holes are made and for carving to a pulley of the engine the cut carving is executed. The part is made of special steel and heat-treated, providing maximum durability and durability.
|Weight , W||kg||9.72|
|Length , L||mm||455|
|Height , H||mm||170|
|Thread , M||M36x1.5|
|Length screw thread , Lc||mm||56|
|Diameter of shaft , Ds||mm||55|
|Diameter of shaft , Ds1||mm||50|
|Thread , M1||3M20x2|
|Diameter of shaft , Ds2||mm||45.5|
|Diameter of shaft , Ds3||mm||35|
|Width , B||mm||190|
|Lenght 2 , L2||mm||370|
|Pin-hole , d1||mm||6|
|Sales unit||1 piece|
|Quantity in the package||1 piece|
|Height , H||mm||180|
|Width , W||mm||200|
|Length , L||mm||470|